Automation for tomorrow.....Service for today
 
 


REO-USA

Dual Controller for Vibratory Feed Systems
Variable Frequency Bowl Controller With Integrated Motor Controller

The Reo 02-1001 dual controller includes a digital variable frequency bowl controller and an integrated DC motor controller for a belt driven prefeeder, hopper, or conveyor.

A Reo MFS 168 digital controller varies the frequency of the output to the feeder bowl. It provides a highly stable drive frequency, independent of the power supply frequency. The MFS 168 has inputs for a track control sensor.  Interfaced to an accelerometer, it provides constant feed rate, auto-tunes the drive unit, and runs the feeder at a constant amplitude.

A 90v DC motor controller is linked to the feeder controller to provide variable speed feeding from a hopper to the feeder bowl. It is interlocked  to the status relay of the MFS 168 controller so the hopper cannot run unless the bowl is in run mode. This dual controller comes to you as a package, ready for easy installation.

Technical Specifications - MFS 168

Supply voltage 110/230v, 50/60 Hz auto setting*
Output frequency Adjustable between 8...140 Hz
Output current 8 amp maximum total current
Soft start 0...4 seconds
Soft stop 0...4 seconds
Sensor supply 24V, 25 mA
Switch ON time delay 0...10 seconds
Switch OFF time delay 0...10 seconds
Enable 12-24v DC / Volt-free contact
Status output 250v, 1 Amp
Enclosure IP54**

*Auto setting allows the controller to accept input power of either 110v or 230v without manual adjustment

**Protected against dust and splashing water

Technical Specifications - 90v DC motor

Supply voltage 115 or 230v, 50/60 Hz
Output current 15
Min Speed 0-30
Max speed 60-140
Max Horsepower 1 (115); 2 (230)

All REO control units are CE marked and conform with European EMC and low voltage directives. They can be used with half or full wave electromagnetic feed systems.
 
 
 
 
 
   

 

 
Pioneer Tool Inc
1497 Main Street #392
Dunedin, FL 34698

Contact: Jack Roach
Phone: 717.781.2884
Fax: 717.441.3785
Email: jroach@pioneertoolinc.com

||   Home   ||   Company Info   ||   Manufacturers   ||   Products   ||   Request Info   ||   Contact Us   ||